HPUE Devices and Network Performance for First Responders

A previous story on AllThingsFirstNet.com describes the advantages of using High Power User Equipment (HPUE) to connect to FirstNet in rural and remote areas. Compared to standard smartphones and 4G/5G wireless modems, HPUE devices transmit at up to 1.25 watts—over six times more power than is offered by commercial cell phones at a maximum transmission output of 0.2 watts. With this extra uplink power, HPUE devices can connect in some locations where standard-power devices may struggle to reach the network.

To be clear: HPUE does not modify FirstNet’s physical cell towers, expand tower range, or increase macro network capacity. Instead, HPUE boosts the user’s ability to reach FirstNet due to its higher transmission output.

In this article, we dig into the details of how HPUE devices improve access to FirstNet, the range of devices available through FirstNet under the MegaRange banner, and what agencies should consider before buying HPUE devices.

How HPUE Devices Improve Access to FirstNet

Cellular communications rely on two-way links. There is the downlink (tower to device) and the uplink (device to tower).

Cell towers transmit at power levels that far exceed those of mobile devices. This explains why a smartphone user may see bars on their display yet be unable to connect to the network.

Higher Transmit Power on Band 14

To reiterate, standard commercial cellular devices are assigned to the 3GPP Power Class 3, which limits their maximum transmit power at 0.2 watts (23 dBm). Under FCC rules, public safety devices that use FirstNet’s Band 14 spectrum are authorized for Power Class 1, allowing transmission at up to 1.25 watts (31 dBm).

FirstNet’s Band 14 is the only radio spectrum legally authorized to operate with HPUE in the United States. This is because FirstNet is the only wireless broadband network built to serve first responders, with support under contract from AT&T. Band 14 is a 20 MHz section of the 700 MHz spectrum designated for FirstNet’s use by Congress.

Uplink performance at the edge of the network

When a smartphone is operating at the fringe of a cell tower’s reach, its uplink speed degrades, often to the point of not being able to connect. With its extra power, an HPUE device can connect where conventional smartphones can’t. This extra power improves its chances of connecting through concrete walls, low-E glass, and underground basements in urban environments.

HPUE Device Options for Public Safety Agencies

Transmitting at 1.25 watts draws substantial power and generates significant thermal output. As a result, HPUE technology is not built into standard pocket smartphones, but rather dedicated routers and hotspots.

FirstNet offers HPUE under its FirstNet MegaRange banner in three primary form factors. All three operate in 4G/5G modes.

Vehicle-mounted HPUE

The Airgain SHIELD MegaFi 2 (mobile) is a vehicle-mounted HPUE transmitter/router that connects into the vehicle’s electrical system. When mounted in police cruisers, fire apparatus, or ambulances, these units use high-gain rooftop antennas to connect to local cellular towers. They also generate a “local Wi-Fi bubble” that can connect up to 256 client devices. This allows standard smartphone users to connect to the bubble to get their signals out in poor coverage areas. (This unit can also be located inside buildings to provide the same service.)

Portable HPUE options

FirstNet MegaRange offers two portable HPUE options. The Sonim MegaConnect is a handheld 5G HPUE mobile hotspot that comes with an 8,000mAh removable battery, Wi-Fi 7 capabilities, and smart power management. It can be paired with high-gain dock accessories, such as the Parsec MegaReach Dock, to boost its antenna performance and reach.

For field command posts on the move, the Airgain SHIELD MegaGo 2 is a portable HPUE-in–a-case with a built-in 64Ah battery that provides up to 12 hours of continuous on-scene operation.

HPUE vs. Cell Boosters

HPUEs and cell boosters are two different systems with different purposes.

FirstNet’s line of AT&T cell boosters acts as miniature cell towers to improve the quality of indoor wireless service. HPUE devices connect directly to cellular towers without using donor antennas.

What Agencies Should Consider When Choosing HPUE Devices

There are numerous factors associated with HPUEs that agencies should consider before buying.

First is the agency’s operating environment. If its officers lose connectivity regularly due to distance and/or working in underground environments, then HPUE can help mitigate these problems.

Second is the fact that the HPUE’s power resides in the router or hotspot, not in an officer’s smartphone. Their handheld devices connect to the HPUE gateway over a local Wi-Fi connection. If they step outside of it, smartphone service goes back to its 0.2 watt baseline.

Third, using 1.25 watts generates heat. This is why the Sonim MegaConnect reverts to its 0.2 watt transmissions if the equipment’s ambient temperature exceeds 95°F while in high-power mode.

Fourth is power. HPUE transmissions require large power sources. For instance, the Nextivity SHIELD MegaGo 2 uses a 236Wh internal battery. Because the battery exceeds the 160Wh FAA limit for lithium-ion batteries, the MegaGo 2 cannot be transported on passenger aircraft.

Finally, HPUE equipment costs more than consumer hotspots. The Sonim MegaConnect has been listed at a $499 MSRP, while larger vehicle and portable-case systems are substantially more expensive and may require agency pricing through FirstNet.

HPUE and the Future of First Responder Connectivity

Given that FirstNet’s MegaRange family of HPUE devices supports 4G and 5G, this equipment is ready to keep up with the future of first responder connectivity. This means that FirstNet users can rely on the enhanced connectivity offered by HPUE on Band 14 for years to come.

FAQ

What is an HPUE device?

A High Power User Equipment (HPUE) device is a cellular gateway, router, or hotspot that transmits at up to 1.25 watts on FirstNet’s Band 14, delivering more than six times the power of standard commercial cellular devices.

How does HPUE improve FirstNet network performance?

HPUE equipment does not alter the cell network itself. Instead, with its extra transmission power, it improves a user’s ability to access the network.

What types of HPUE devices are available for first responders?

FirstNet MegaRange HPUE devices are available as vehicle-mounted routers, portable battery-powered hotspots, and ruggedized field case systems.

Does HPUE work on 5G?

Yes. FirstNet MegaRange HPUE devices work on 5G over Band 14.

print

Be the first to comment on "HPUE Devices and Network Performance for First Responders"

Leave a comment

Your email address will not be published.


*